TM 9-4933-223-13&P
3-14. SHOP SET--CEILING MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
INSPECTION
DISASSEMBLY
NOTE
Each blind insert is removed from a
FIFTEEN BLIND INSERTS. Check for missing
large hole which has two small holes on
or loose parts.
each side of it.
These three holes must be drilled clear
of cured adhesive as described in steps
2 and 3 below.
This procedure pertains to each blind
insert removed.
1
FIFTEEN BLIND INSERTS (1).
If
replacement is required, remove by drilling
out with a 0.344-in. (0.874-cm) diameter
drill.
3-142
