TM 9-4933-223-13&P
3
TWO SMALL HOLES (3).
a.
Drill a 0.125-in. (0.318-cm)
hole 0.25 in. (0.64 cm) deep.
b.
Insert a 0.062-in. (0.157 -cm)
drill and drill a hole at an angle
to intersect large hold (2).
2 LARGE HOLE (2). Drill
a
0.375-in
(0.953-cm) diameter hold 1.50
in.
(3.81) deep.
REPAIR
FIFTEEN BLIND INSETS. Replace if removed.
3-143
