TM 9-4933-223-13&P
13-18. SWITCHBOX AND MOUNTING BRACKET (WITH TOGGLE SWITCH)--MAINTENANCE INSTRUCTIONS (cont)
REPAIR
MODIFICATION
NOTE
Modification of the switchbox
NOTE
may be necessary when the
switchbox is replaced by a new
The hex nut is a component of
one.
the toggle switch.
1
SWITCHBOX (1).
Repair is by replacement of
authorized parts (app C) as
a. On the back, drill two 0.25- in.
required.
(0.64-cm) holes (2), using the
mounting bracket (3) as a template.
b. On the back, drill one 0.53-in. (1.35-
cm) hole (4), using the ,mounting
bracket (3) as a template.
REASSEMBLY/INSTALLATION
2
COVER (5).
a. Drill one 0.47-in. (1.19-cm) hole (6)
as illustrated.
b. Stencil black lettering (7) in 0.25-in.
NOTE
(0.64-cm) letters using black
For clarity, wires not mentioned
semigloss lacquer (item 11, app D)
in the text are not shown.
as illustrated.
1
MOUNTING BRACKET (1). Install two
flat washers (2) and two hex head
capscrews (3).
3-174
