TM 9-4933-223-13&P
REPAIR
Repair is by replacement of authorized parts (app
13 MOUNTING BRACKET (15).
a. Remove two hex head capscrews
(16) and two flat washers (17).
b. Remove.
MODIFICATION
SWITCHBOX (1).
a. On the back, drill two 0.25 in. (0.64-cm) holes (2),
using the mounting bracket (3) as a template.
NOTE
b. On the back, drill one 0.53 in. (1.35-cm) hole (4), using
Modification of the switchbox may
the mounting bracket (3) as a template.
be necessary when the switchbox is
replaced by a new one.
c. On the side, drill one 0.19 in. (0.48-cm) hole (5) as
illustrated.
3-183