TM 9-4933-223-13&P
INSTALLATION
b. Reweld any cracked welds.
c.
Touch up, as required, any interior surfaces
WARNING
with black semigloss lacquer (item 11, app
Ventilation fan and mounting
panel should he removed from
surfaces with green enamel (item 8, app D).
shelter wall prior to installation
of fan blackout cover. Refer to
NOTE
TM 10-5410-224- 14 for
If either baffle or outer cover are replaced,
instructions. Mounting panel
they must be rewelded to each other.
should be placed in horizontal
position with mounting screws
d. If not repairable, replace with new fabricated
vertical.
2
SIX SPACERS (2). Screw onto six
existing mounting screws (3) holding
ventilation fan to mounting panel.
1
INNER COVER (1). Install.
3-191
