TM 9-4933-223-13&P
3-34. WIRING HARNESS ASSEMBLY (SWITCH TO DISTRIBUTION CEILING OUTLETS)--MAINTENANCE INSTRUCTIONS (cont)
REMOVAL
INSPECTION
DISASSEMBLY
Refer to the removal procedures for the harness assembly in
Check all wire sections in the harness assembly for breaks,
NOTE
corrosion, and worn or deteriorated insulation. Check for continuity
Lug terminals should be removed only when
necessary to replace defective parts.
1
EIGHT LUG TERMINALS (1). Remove by cutting from five green wires (2).
2
THREE LUG TERMINALS (3). Remove by cutting from three blue wires (4).
3-258