TM 9-4933-223-13&P
3-39. 120/208V CABLE ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
23
GLAND NUT (3). (cont)
NOTE
The following procedures
b. Tighten to a torque level of 35 to
pertain to assembly of the
40 lb-ft (47.25 to 54 N-m).
electrical
plug
connector
(female).
c.
Retorque to same level after
approximately 12 hours.
24
BAND (20). Slip on cable (1).
26
GLAND NUT (3). Slip on cable (1).
27
GRIP (4). Slip on cable (1).
28
GLAND (5). Slip on cable (1).
29
SPACER (6). Slip on cable (1).
30
REAR CONNECTOR HOUSING (7)
Slip on cable (1)
25
CABLE (1).
a. Cut both ends square.
b. Remove outer jacket (2) to 4.25 in.
(10.80 cm) from each end.
3-290
