TM 9-4933-223-13&P
CONVERSION TABLE
NOTES
IN.
CM
36.12
91.74
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.03 in. (0.08 cm) and a three-digit
0.25
0.64
decimal has a tolerance of 0.015 in. (0.038 cm).
0.188
0.478
2.00
5.08
1.00
2.54
2.
Fabricate from steel structural angle, NSN 9520-00-277-4912.
13.50+0.01
34.29t0.03
10.06+0.01
25.55+0.03
3.
Deburr all holes.
25.00
63.50
1.75
4.45
WARNING
0.500
1.270
Use only type 1.1.1 trichloroethane solvent. Never use
16.38+0.01
41.61+0.03
portable degreaser with solvent in it unless ventilation
1.312
3.332
fan is turned on. Breathing solvent vapors will cause
36.50
92.71
unconsciousness, prolonged skin contact with solvent will
18.00
45.72
cause irritation, and taking solvent internally will cause
0.81
2.06
vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 1, app D).
5.
Apply one coat primer coating (item 14, app D), followed by two
coats semigloss OD enamel (item 7, app D).
6.
Mark with black stencil marking ink (item 17, app D) as follows.
P/N 12011651
Change 1 E-5
