TM 9-4933-223-13&P
CONVERSION TABLE
NOTES
IN.
CM
2.00
5.08
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.03 in. (0.08 cm) and a three-digit
21.50+0.03
54.61+0.08
decimal has a tolerance of 0.015 in. (0.038 cm).
25.12+0.03
63.80+0.08
0.188
0.478
18.00-0.03
45.72-0.08
2.
Fabricate from steel structural angle, NSN 9520-00-277-4939 and
1.50
3.81
steel metal strip, NSN 9515-00-066-1015.
2.50
6.35
0.438
1.113
3.
Deburr all holes.
16.380+0.01
41.61+0.03
0.81
2.06
WARNING
1.31
3.33
Use only type 1.1.1 trichloroethane solvent. Never use
3.00
7.62
portable degreaser with solvent in it unless ventilation
8.44+0.01
21.44+0.03
fan is turned on. Breathing solvent vapors will cause
13.50+0.01
34.29+0.03
unconsciousness, prolonged skin contact with solvent will
cause irritation, and taking solvent internally will cause
vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 1, app D).
5.
Apply one coat primer coating (item 14, app D), followed by two
coats semigloss OD enamel (item 7, app D).
6.
Mark with black stencil marking ink (item 17, app D) as follows.
P/N 12011652
Change 1 E-7
