TM 9-4933-223-13&P
CONVERSION TABLE
NOTES
IN.
CM
2.000-
5.080
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.13 in. (0.33 cm) and a three-digit
4.50+0.10
11.433+0.25
decimal has a tolerance of 0.060 in. (0.152 cm). All angles have
46.00
116.84
0.922
2.341
a tolerance of +5 degrees.
0.60
1.52
54.00
137.16
2.
Fabricate from rigid metal conduit, NSN 5975-00-178-1217.
30.38
77.17
0.75
1.91
3.
Ream ends to remove rough edge and break all sharp edges.
WARNING
Use only type 1.1.1 trichloroethane solvent. Never use
portable degreaser with solvent in it unless ventilation
fan is turned on. Breathing solvent vapors will cause
unconsciousness, prolonged skin contact with solvent will
cause irritation, and taking solvent internally will cause
vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 1, app D).
5.
Apply one coat primer coating (item 14, app D), followed by two
coats white lacquer (item 12, app D).
6.
Do not apply primer or lacquer within 0.60 in. (1.52 cm) of either
end.
Change 1 E-11
