TM 9-4933-223-13&P
FIGURE 8. SPACER (PART NO. 7551093)
CONVERSION TABLE
NOTES
IN.
CM
2.25
5.72
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.03 in. (0.08 cm) and a three-digit
0.50
1.27
decimal has a tolerance of 0.010 in. (0.025 cm).
1.00
2.54
0.25
0.64
0.280
0.711
2.
0.75
1.91
1.12
2.84
3.
Break all sharp edges and deburr hole.
E-15