TM 9-4933-223-13&P
CONVERSION TABLE
NOTES
IN.
CM
16.375
41.592
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.03 in. (0.08 cm) and a three-digit
0.500
1.27
decimal has a tolerance of 0.015 in. (0.38 cm).
1.000
2.54
0.250
0.635
72.630.06
184.480.15
2.
Fabricate from steel structural angle, NSN 9520-00-277-4912.
18.13
46.05
0.88
2.24
3.
Break all sharp edges and deburr all holes.
2.56
6.50
16.062
40.797
WARNING
29.562
75.087
Use only type 1.1.1 trichloroethane solvent. Never use
43.062
109.377
portable degreaser with solvent in it unless ventilation
56.562
143.667
fan is turned on. Breathing solvent vapors will cause
70.062
177.957
unconsciousness, prolonged skin contact with solvent will
16.380
41.605
cause irritation, and taking solvent internally will cause
0.4380.010
1.1130.025
vomiting.
2.00
5.08
0.188
0.478
4.
Degrease with type 1.1.1 trichloroethane (item 1, app D).
1.00
2.54
5.
Apply one coat primer coating (item 14, app D), followed by two
coats semigloss OD enamel (item 7, app D).
6.
Mark with black stencil marking ink (item 17, app D) as follows.
P/N 12011662
E-17 Change 1
