Chapter 1. INTRODUCTION - TM-9-4940-546-14-P0007

INTRODUCTION

Section I.

GENERAL

SCOPE.

a. This manual is published for the use of the personnel to whom

the Southwest. Truck Body Model SELR, Shop Equipment is issued.

b. The manual provides information related to the contents of the

shop equipment and the wiring diagrams (fig. 1 & 2). For operating

and maintenance instructions pertaining to the trailer and components

other than the shop set contents covered in this publication, refer

to Appendix "A" References.

1-2. MAINTENANCE FORMS AND RECORDS. Equipment maintenance forms

and procedures for their use are contained in TM 38-750, The Army

Maintenance Management System (TAMMS).

1-3. ADMINISTRATIVE STORAGE. For information necessary to meet

Administrative Storage Requirements, refer to TM 740-90-1.

1-4. EQUIPMENT SERVICEABILITY CRITERIA (ESC). There are no Equip-

ment Serviceability Criteria (ESC) technical manuals in existence per-

tinent to the end item of equipment being covered in this publication.

1-5. DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE. For proce-

dures required to render this end item unusable by the enemy, refer

to TM 750-244-3.

QUALITY ASSURANCE/QUALITY CONTROL (QA/QC).

a. Refer to MIL-STD-109 and MIL-M-38784 for QA/QC terms and defi-

nitions.

b. Refer to Technical Manual TM 9-2330-238-14&P and DMWR 9-4940-

451 for the applicable QA/QC requirements.

1-7. REPORTING QUALITY DEFICIENCY REPORTS (QDR). QDR's will be

prepared on SF 368, Quality Deficiency Report. Instructions for pre-

paring QDR's are provided in TM 38-750, The Army Maintenance Manage-

ment System. QDR's should be mailed directly to Commander, USA

Armament Materiel Readiness Command, ATTN: DRSAR-MAO, Rock Island,

IL 61299. A reply will be furnished directly to you.