TM
9-4940-549-14&P
INTRODUCTION
Section I.
GENERAL
SCOPE .
a.
This manual is published for the use of the personnel to whom
the Truck Body Model SGPRSMD, Semitrailer Mounted General Purpose is
issued.
b.
This manual provides information related to the contents of
the
shop set and includes wiring diagrams (Figures FO-1 through FO-4).
For operating and maintenance instructions pertaining to the truck
and
components other than the shop equipment contents covered in this
MAINTENNACE FORMS AND RECORDS.
Equipment maintenance forms and
records and procedures for their use are contained in DA PAM 738-750
as contained in Maintenance Management Update.
ADMINISTRATIVE STORAGE.
For information necessary to
meet
Administrative Storage Requirements, refer to TM 740-90-1.
EQUIPMENT SERVICEABILITY CRITERIA (ESC).
There are no Equipment
Serviceability Criteria (ESC) technical manuals in existence pertinent
to the end item of equipment being covered in this publication.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.
For proce-
dures required to render this end item unusable by the enemy, refer to
TM 750-244-3.
QUALITY ASSURANCE/QUALITY CONTROL (QA/QC). There is no Quality
Assurance/Quality Control (QA/QC) manual in existence containing the
applicable requirements for maintenance of the equipment covered in
this publication.
REPORTING QUALITY DEFICIENCY REPORTS (QDR).
QDR's will be
prepared on SF 368, Quality Deficiency Report.
Instructions
for
preparing QDR's are provided in DA PAM 738-750 as contained in Mainte-
nance Management Update.
QDR's should be mailed directly to Com-
mander, US Army Armament, Munitions and Chemical Command, ATTN:
DRSMC-MAO, Rock Island, IL 61299.
A reply will be furnished directly
to you.
Section II.
DESCRIPTION AND DATA
1-8. DESCRIPTION. The Model
SGPRSMD Shop Set (fig.
1-1) is
semi-trailer
mounted and contains tools and equipment that are used for maintenance
and repair of mechanical equipment.
The trailer is equipped with doors
to provide easy access to the equipment in the set (fig. 1-2). A weath-
er protected work area may be set up around the trailer (fig. 1-3). A