TM 9-4940-549-14&P
(2) Disconnect wiring connector from temperature transmitter,
(3) Refer to figure 7-16 and remove the temperature transmitter.
Cleaning and Inspection.
b.
(1) Clean with compressed air and a soft bristle brush or with a
clean lint-free cloth moistened with an approved solvent.
(2) Inspect for cracked casing, corrosion, and damaged threads and
connections.
Installation.
c.
(1) Refer to figure 7-16 and install the temperature sensors.
(2) Connect electrical wiring connector.
(3) Service the radiator as required.
7-6.
0IL
PRESSURE
SENDING
UNITS.
Removal.
a.
(1) Tag and disconnect electrical leads from the sending unit.
(2) Refer to figure 7-17 and remove the oil sending units.
Cleaning and Inspection.
b.
(1) Clean the sending units with compressed air and a soft bristle
brush or wipe with a clean, lint-free cloth lightly with an ap-
proved solvent.
(2) Inspect sending units for cracked casing, stripped or damaged
threads, corrosion, or other visible damage.
c.
Installation.
(2) Connect the electrical leads to the sending units per the tagged
identification.