tor-welder base.
Install model CMU-5
(3) Refer to figure 5 and remove the control
panel, model CMU-5, in a similar manner.
base in a similar manner.
(2) Refer to TM 5-4940-200-12 and install the
Note
Remove the two screws that secure
cover. On model CMU-5 shop sets, install
the reverse current relay mounting
the engine overspeed relay resistor and
bracket to the control panel and hold
switches to the generator-welder.
the reverse current relay while
removing the panel.
23. Control Panel
b. Installation.
a. Removal.
(1) Refer to figure 5 and install the control
(1) Refer to TM 5-4940-200-12 and remove
panel, model SECM.
the control panel screen.
(2) Refer to figure 5 and install the control,
(2) Refer to figure 5 and remove the control
model CMU-5, in a similar manner.
panel, model SECM.
(3) Refer to TM 5-4940-200-12 and install the
control panel screen.
Figure 5. Control panel, model SECM, removal and installation.
17