TM 5-4940-200-35
(5) Inspect the drive cover for breaks and
d. Reassembly.
Refer to
figure 8 and reassemble
cracks.
the governor adapter drive.
(6) Inspect all hardware for worn or damaged
threads.
e. Installation. Refer to TM 5-4940-200-12 and
(7) Replace all defective parts.
install the governor adapter and drive pulley.
1
Shaft collar, 5/8 id, 1 3/8 od,
6
Ball bearing
1/4 in. thk
7
Drive cover
2
Plain encas ed oil seal
8
Sleeve bushing
3
Screw, machine, No. 10-24 x
9
Gasket
5/8 in. (4 rqr)
10
Drive shaft
4
Washer, lock, No. 10 (4 rqr)
11
Pin, headless, 1/8 x
5
Governor drive bracket
1 1/4 in.
Figure 8. Governor adapter drive, disassembly and reassembly.
22