2-4. ASSEMBLY AND PREPARATION FOR USE (cont)
d. Preparation of Environmental Control Units (ECU) for Operation.
A minimum of four personnel is required when moving or
lifting the ECU's. (Each weighs approximately 270 lb (122
There are two ECU's furnished with the shop set.
following instructions pertain to only one ECU.
(6) Install two plastic plugs (10) into blind inserts (11) in floor (from
(1) Remove two straps (1) holding ECU (2) in frame assembly (3)
which tiedown rings were just removed).
(7) Store all mounting hardware in storage chest.