TB 9-4940-302-30
in. diameter holes in bracket. Position
5.
Installation--Continued
over installed blind rivet nuts in
accordance with figure 11. Secure
machine using a 24-in. retaining strap
mounting bracket to wall-mounted blind
(7550588-5) in accordance with figures
rivet nuts using three #10 x 5/8-in.
9 and 13.
countersunk head machine screws (MS35190-
(8) Position 30-in. bed indus-
272). Install fire extinguisher in
mounting bracket.
trial sewing machine (3530-00-892-4652)
in rear left corner in accordance with
(11) Before installing first aid
36-in. retaining straps (7550588-4),
kit (6545-00-922-1200), remove contents
and drill three 0.22-in. diameter holes
passed through floor-mounted eyebolts
in back of case. Position first aid
and wrapped around table legs, in
accordance with figures 9 and 13.
kit in location shown in figure 11 over
installed blind rivet nuts. Secure to
Apply wheel brakes and swivel locks at
this time on previously installed
wall using three #10 x 5/8-in. counter-
casters (11021187).
sunk head machine screws (MS35190-272).
Install contents of the first aid kit.
(9) Position two folding legs
tables (7195-00-357-7480) lengthwise on
Follow steps (1) and (2) below
edge of 30-in. bed industrial sewing
for location of equipment when IS0-2-1
machine, in accordance with figures 9
shelter is deployed.
and 13, with tabletops facing each
other. Place glazier's rule (5210-00-
(1) Locate 14-in. bed industrial
819-7589) between tabletops. Secure
sewing machine (3530-00-892-4630) in
folding legs tables to 30-in. bed
accordance with figure 14.
industrial sewing machine table legs
using two 66-in. retaining straps
(2) Locate two folding legs
(7550588-9).
tables (7195-00-357-7480) and 30-in.
bed industrial sewing machine (3530-00-
(10) Position mounting bracket of
892-4652) in accordance with figure 15.
fire extinguisher (4210-00-555-8837) on
Apply wheel brakes and swivel locks on
rear right wall in accordance with
casters (11021187).
11
