TM 1-4920-433-13&P
0030 00
LOWERING SHELTER ROOF - CONTINUED
Figure 6.
Hinged Jack Assemblies Extension.
6.
Remove jack extensions (if necessary).
a.
Remove two quick-disconnect pins (Figure 6, Item 1) from jack assembly.
b.
Remove hinged jack assembly (Figure 6, Item 3) from jack extension (Figure 6, Item 2).
c.
Remove one lat washer (Figure 6, Item 4) and one cotter pin (Figure 6, Item 5) from end of shaft (Figure
6, Item 6).
d.
Remove two bushings (Figure 6, Item 8) and shaft (Figure 6, Item 6) from jack assembly.
e.
Remove jack extension (Figure 6, Item 2) from jack base (Figure 6, Item 7).
f.
Install hinged jack assembly (Figure 6, Item 3) into jack base (Figure 6, Item 7) and secure by installing
shaft (Figure 6, Item 6) through two bushings (Figure 6, Item 8).
g.
Install one lat washer (Figure 6, Item 4) and one cotter pin (Figure 6, Item 5) on end of shaft (Figure 6,
Item 6).
h.
Store two jack extensions (Figure 6, Item 2) in Shelter BII box.
7.
Store hinged jack assemblies on left cargo door and secure with safety pins.
0030 00-5