TM 1-4920-433-13&P
0030 00
LOWERING SHELTER
NOTE
If it is intended to use a dolly set to move shelter, place pieces of 4x4 lumber under frame.
Ensure that ISO ittings are clear to facilitate mounting of dolly set.
Stencil on leveling support jack indicates handle rotation to raise or lower jack.
Figure 10.
Lowering Leveling Support Jack Assemblies.
1.
Remove safety pins (Figure 10, Item 6) from leveling support jacks (Figure 10, Item 5).
2.
Lower all leveling support jacks simultaneously until shelter is completely lowered.
3.
Turn locking handle (Figure 10, Item 7) clockwise thus unlocking jack attachment (Figure 10, Item 4) from
ISO itting (Figure 10, Item 3).
4.
Remove upper jack attachment insert (Figure 10, Item 1) from upper jack support bracket (Figure 10, Item 2).
5.
Remove leveling support jacks from four corners of shelter.
0030 00-9
