TM 1-4920-436-13&P
0045 00
TEST AND INSPECTION
BOX CONNECTOR
Figure 2.
Box Connector.
1.
Move main circuit breaker to OFF position.
2.
Visually inspect box connector for damage.
3.
Replace box connector if damage is detected.
REMOVAL
WARNING
HIGH VOLTAGE exists in electrical system of shop. All electrical inspections, repairs, or
replacements will be performed with power OFF and only by a qualiied electrician. Serious
shock hazards exist which could result in INJURY OR EVEN DEATH to personnel.
1.
Ensure main circuit breaker is in OFF position.
2.
Disconnect wires from 240V receptacle to box connector.
3.
Pull wires back from box connector.
4.
Loosen box connector from conduit.
5.
Remove box connector nut and remove from box.
6.
Remove box connector by sliding off conduit.
INSTALLATION
1.
Ensure main circuit breaker is in OFF position.
0045 00-3