TM 1-4920-436-13&P
0046 00
REMOVAL CONTINUED
Figure 5.
45 Degree Angle Adapter Removal from Power Entry Panel Cover.
5.
Remove four machine screws (Figure 5, Item 5) from power entry panel cover (Figure 5, Item 1).
6.
Remove four nuts (Figure 5, Item 6), four lock washers (Figure 5, Item 2) and four bolts (Figure 5, Item 3),
which attach 45 degree angle adapter (Figure 5, Item 4) to power entry panel cover.
INSTALLATION
NOTE
Hardware for 45 degree angle 60 amp receptacle is provided by manufacturer.
1.
Install new 45 degree angle adapter (Figure 5, Item 4) by installing four bolts (Figure 5, Item 3), four lock
washers (Figure 5, Item 2) and four nuts (Figure 5, Item 6) to attach 45 degree angle adapter to power entry
panel cover.
2.
Install four machine screws (Figure 5, Item 5) on power entry panel cover.
NOTE
Receptacle lugs are identiied by letters "X", "Y", and "Z" with ground connection being identiied
by color green. Black wire will be attached to "X", red wire will be attached to "Y", and blue wire
will be attached to "Z".
3.
Replace wires and tighten all lugs on 60 amp receptacle.
4.
Install four machine screws to attach 60 amp receptacle to 45 degree adapter housing.
0046 00-5
