TM 1-4920-440-13&P
0052 00
INSTALLATION
Figure 2.
Door Lock Tabs Placement.
1.
Install door lock tabs (Figure 2, Item 1) by using latch handle (Figure 2, Item 2) as a guide to position.
2.
Mark position of door lock tabs (Figure 2, Item 1).
NOTE
There should be adequate clearance for latch handle to swing around door lock tabs without
3.
Rotate latch handle (Figure 2, Item 2) out of way and match drill door lock tabs (Figure 2, Item 1) to door in
two places.
4.
Deburr all holes and clean off all metal shavings.
5.
Dip rivet s mandrel in Polysulide Sealant before inserting into drilled holes.
6.
Position door lock tabs (Figure 2, Item 1) and insert two rivets into two pre-drilled holes.
0052 00-3