TM 1-4920-440-13&P
FIELD MAINTENANCE
PRODUCTION/QUALITY CONTROL SHOP
MAINTENANCE INSTRUCTIONS FOR DOOR LOCK TABS
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Disc Grinder (WP 0063 00, Table 2, Item 101 )
Tan 686 (WP 0069 00, Item 7)
Drill Set, Twist (WP 0063 00, Table 2, Item 102 )
Personnel Required
General Mechanics Tool Kit
CMF 15 Series (1)
(WP 0063 00, Table 2, Item 104 )
CMF 44B Metal Worker (1)
Hand Yoke Riveter (WP 0063 00, Table 2, Item 105 )
References
Portable Electric Drill (WP 0063 00, Table 2, Item 108 )
TM 1-1500-204-23
Paint Brush (WP 0063 00, Table 2, Item 107 )
TM 43-0139
Materials/Parts
Equipment Condition
Primer, Coating (WP 0069 00, Item 4)
Polysulide Sealant (WP 0069 00, Item 5)
Functional
INSPECTION OF INSTALLED ITEMS
Figure 1.
Door Lock Tabs.
1.
Inspect door lock tabs (Figure 1, Item 1) for broken or cracked welds (Figure 1, Item 2).
2.
Ensure rivets (Figure 1, Item 3) are secure.
3.
Replace door lock tabs (Figure 1, Item 1) if damage is detected.
REMOVAL
CAUTION
Use extreme care not to grind or cut through shelter skin.
NOTE
Refer to TM 1-1500-204-23 for procedures to remove rivets.
1.
Grind welds (Figure 1, Item 2) from door lock tabs (Figure 1, Item 1).
0052 00-1