TM 1-4920-441-13&P
0051 00
REMOVAL
NON-METALLIC HOSE AND FITTINGS REMOVE
Figure 2.
Hose Clamp Removal.
1.
Remove bolts (Figure 2, Item 2) and loop clamps (Figure 2, Item 3) from non-metallic hose (Figure 2, Item 1).
Figure 3.
Hose Replacement.
2.
Slit non-metallic hose (Figure 3, Item 4) lengthwise, with a utility knife (Figure 3, Item 3), from protective cap
(Figure 3, Item 2) to end of itting (Figure 3, Item 1); approximately 1 1/2 inches.
0051 00-3