0050 00
TM 1-4920-441-13&P
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Inspect Fire Extinguisher Bracket.
1.
Inspect ire extinguisher bracket (Figure 1, Item 1) for damage. Replace as necessary.
2.
Inspect ire extinguisher bracket hardware (Figure 1, Item 2 through 4) for rust, cracks, and rounded heads.
Replace as necessary.
REMOVAL
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
2).
INSTALLATION
1.
Position ire extinguisher bracket (Figure 1, Item 1) by aligning bolt holes with wall inserts.
2.
Install two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
2).
Torque bolts (Figure 1, Item 4) 160-190 in. lbs.
3.
4.
Mount ire extinguisher onto ire extinguisher bracket (Figure 1, Item 1).
END OF WORK PACKAGE
0050 00-2
