TM 1-4920-500-13&P
0008 00
CONNECTING POWER TO ECUs
CAUTION
Refer to TM 5-4120-369-14 for specific grounding instructions of ECUs.
2
7
6
5
3
1
4
MODE
TEMPATURE
SSAE052
1. Inspect installation of ECU A (1) and power cable (2).
2. Position MODE switch (3) to OFF position.
3. Remove protective dust cap (4) from power input receptacle (6).
4. Push end of connector (5) into power input receptacle (6) until seated.
5. Screw connector lock ring (7) on power input receptacle (6).
6. Repeat steps 1 through 5 for ECU B.