TM 1-4920-500-13&P
0008 00
POSITIONING TABLE ASSEMBLIES B AND C, THREAD CUTTING DIE AND TAP SET, ELECTRICAL
CONNECTOR MAINTENANCE KIT, WASTE CAN, AND CASE SET FOR OPERATIONAL MODE
1
2
3
4
6
5
7
SSAE054
1. Remove cargo straps from table assemblies B (1), C (2), and D (5).
2. Remove cargo straps from elect rical connect or maint enance kit (3), thread cutting die and tap set (4), and
case set (7).
3. Remove webbing straps from waste can (6).
4. Position elect rical connect or maint enance kit (3), thread cutting die and tap set (4), waste can (6), and case
set (7) at preferred location.
5. Position table assemblies B (1) and C (2) at preferred locations.
6. Store cargo and webbing straps in secure storage location.