TM 1-4920-500-13&P
0012 00
ARMAMENT AND ELECTRICAL SHOP
OPERATION UNDER USUAL CONDITIONS
The following procedures and recommended sequence for moving equipment shall be observed. Transport
positions in which equipment will be located are identified.
CAUTIONS
Care must be taken to ensure that proper bolts, washers and nuts are used
to secure equipment when shop is transported. Incorrect hardware could
cause extensive damage to equipment or shelter.
Torque values are provided and must be respected to prevent possible
damage to equipment or shelter. Improper procedures could result in
extensive damage to government property.
1. Remove cotton mailing bag, which contains equipment hardware, from shelter BII box.
2. Inspect hardware for damage or missing parts.
POSITIONING POWER SUPPLY FOR TRANSPORT MODE
1
2
SSAE071
1. Remove two set screws from floor inserts at power supply (2) transport location.
2. Store set screws in secure storage location.
3. Obtain two bolts and two lock washers from cotton mailing bag in shelter BII box.
4. Position power supply mounting frame (2) adjacent to cabinet C (1).
5. Secure power supply mounting frame (2) by installing two bolts and two lock washers.