TM 1-4940-355-12&P
0020 00
4
OUTSIDE OF
8
MAIN BOX
3
2
1
7
56
4
7
6
5
3
2
1
16
9
9
15
14
13
12 14
13
12
9
10
11
MS023091
Figure 7. Overhead Cargo/Maintenance Rack Assembly Installation
NOTE
Apply Loctite sealing compound to all bolts during installation and apply RTV
waterproofing compound around all bolt holes on Main Box Assembly.
11. Install two 3/8-inch bolts with lock washers and flat washers (5, 6, 7), in sequence, through Overhead Rack
Assembly and Angle Support into existing tapped holes in Main Box Assembly. Do not tighten. (Figure 7)
12. Install two 3/8-inch bolts with lock washers, flat washers and nuts (4, 3, 2, 1), in sequence, through Angle
Support and Overhead Rack Assembly. Do not tighten. (Figure 7)
Change 1
