TM 5-4310-381-13
REMOVAL.
a. Remove bolts (1) and nuts (2) that secure base (3) and mounts (4) to frame (5). Engine, air pump, air filter
assembly and air hose assembly can remain attached to base.
b. Remove wheel assembly (6) from frame. Refer to paragraph 3-23.
c. Remove bolt (7), washers (8), nut (9) and rubber stop (10) from frame.
d. Remove hand grips (11).
e. Remove tubing caps (13).
REPAIR.
a. Inspect frame (5) and frame mount brackets (12) for cracks in weldments. Repair as necessary.
b. Inspect rubber stops (10) for damage or deterioration. Replace as necessary.
c. Inspect hand grips (11) for damage. Replace as necessary.
INSTALLATION.
a. Install hand grips (11).
b. Install tubing caps (13).
c. Install rubber stops (10), nuts (9), bolts (7) and washers (8) to frame.
d. Install wheel assembly (6) to frame. Refer to paragraph 3-23.
e. Position base (3) and mounts (4) onto frame (5). Secure with bolts (1) and nuts (2).
3-26
