61. General
governor adapter drive V-belt.
The governor is a flyweight-type unit, consisting
(3) Install the power takeoff access door and
of a governor and linkage, which operates in conjunc-
tion with the generator-welder. The governor is
d r i v e n by the generator-welder power takeoff
64. Governor Adapter
Drive
through an adapter and flexible drive cable and is
a. Removal.
bracket mounted on the top of the cylinder head of
(1) Remove power takeoff access door and
the truck engine. The govcrnor opens and Closes a
valve in the carburetor, through the Iinkage, to
(2) Remove governor adapter drive pulley
control the engine fuel-air intake. The govcrnor
maintains a steady engine speed during the operational
(3) Refer to figure 37 and remove the governor
of the generator-welder.
adapter drive from the shop set body.
b. Cleaning and Inspection.
(1) Clean all metal parts with a cloth dampened
a. Removal. Refer to
figure 33 and remove the
with an approved cleaning solvent and dry
governor from the engine.
thoroughly.
(2) Inspect the governor adapter drive for
ble the governor linkage assembly.
cracks, breaks, or other damage. Replace
c. Cleaning, Inspection, and Repair.
a damaged governor adapter drive. Re-
(1) Clean all parts with an approved cleaning
place worn or damaged mounting hardware.
solvent and dry thoroughly.
c. Illstration.
(2) I n s p e c t t h e c o m p o n e n t p a r t s o f t h e
(1) Refer to figure 37 and install the governor
governor linkage for cracks, breaks, or
adapter drive to the shop set body.
other damage. Replace a damaged or
(2) Install the governor adapter drive pulley
defective part,
(3) Refer to figure 38 and adjust the governor
the governor linkage in reverse order.
adapter drive V-belt.
e. Installation, Refer to figure 33 and install the
(4) Install power takeoff access door and guard
governor on the engine,
j. Adjustment. Refer to figure 35 and adjust the
65. Throttle Control
governor.
a. Removal. Refer to
figure 39 and remove the
63. Governor Adapter Drive Pulley
throttle control from the shop set body.
b. Cleaning and Inspection.
a. Removal.
(1) Clean the parts with an approved cleaning
(1) Remove the power takeoff access door and
solvent and dry thoroughly.
(2) Inspect the throttle cable for breaks or
(2) Refer to figure 36 and remove the governor
kinks and for lack of freedom of operation.
adapter drive pulley from the governor
Replace a damaged or defective throttle
adapter drive.
control.
b. Cleaning and Inspection.
(3) Inspect all parts for cracks, breaks, or
(1) Clean the metal parts with an approved
other damage. Replace a defective part.
cleaning solvent and dry thoroughly.
(4) Inspect the hardware for worn or damaged
(2) Inspect the governor adapter drive pulley
threads,
for cracks, breaks, or other damage. Re-
c. Installation. Refer to figure 39 and install the
place a damaged pulley.
throttle control to the shop set body.
(3) Inspect threaded parts for worn or damaged
threads. Replace as necessary.
66. Throttle Control Linkage
c. Installation.
(1) Refer to figure 36 and install the adapter
throttle control linkage from the engine.
drive pulley to the governor adapter drive.
TAGO 5672-A