TM 5-4940-200-35
CHAPTER 1
INTRODUCTION
Section I. GENERAL
2628 Recommended Changes to DA Technical Manual
1. Scope
Parts Lists or Supply Manual 7, 8, or 9) will be used for
a. These instructions are published for the use of
reporting these improvements.
This form will be
the field and depot maintenance personnel maintaining
completed in triplicate using pencil, pen, or typewriter.
the Southwest Truck Body Company, Model SECM, and
The original and one copy will be forwarded direct to the
Davey Compressor Company, Model CMU-5, Truck
Commanding Officer, U. S. Army Mobility Support
Mounted Shop Equipment Set Number 3. They provide
Center, ATTN: SMOMS-MM, P. O. Box 119, Columbus,
information on the maintenance of the equipment which
Ohio 43216. One information copy will be provided to
is beyond the scope of the tools, equipment, personnel,
the individual's immediate supervisor (e.g., officer,
or supplies normally available to using organizations.
noncommissioned officer, supervisor, etc.).
e. Report
all
equipment
improvement
applicable to this manual. The maintenance allocation
recommendations as prescribed by TM 38-750.
chart is located in the operator and organizational
maintenance manual TM 54940-200-12.
Field and
2. Record and Report Forms
depot maintenance repair parts are listed in
TM 5-4940-200-35P.
For record and report forms applicable to field
and depot maintenance, refer to TM 38750.
c. Numbers in parentheses on illustrations indicate
quantity. Numbers preceding nomenclature callouts on
Note
illustrations indicate the preferred maintenance
Applicable forms, excluding Standard
sequence.
Form 46, (United States Government
Motor
Vehicle
Operator's
d. The direct reporting by the individual user of
Identification Card), which is carried
errors, omissions, and recommendations for improving
by the operator, will be kept in a
this manual is authorized and encouraged. DA Form
canvas
bag
mounted
on
the
equipment.
Section II. DESCRIPTION AND DATA
3. Description
4. Tabulated Data
A general description of the shop set, the
a. Motor-Generator Classification and Rating.
location and description of the identification plates, and
information on the difference in models are contained in
Rating .........................7.5 kw (kilowatt)
TM 5-4940-200-12. A more detailed description of the
Voltage ........................208 v (volts)
components is contained in TM 5-4940-200-12. The
Amperes .....................38 amp (amperes)
repair and maintenance instructions are described in
Phase .........................3
appropriate sections of this manual.
Frequency ....................50/60 cycles
Cooling ........................Fan
Lubrication....................Sealed bearings
2
