TM 5-4940-200-35
Compound No. 6:
Dipping and
Number of
baking.
Dip in and out, drain 10 min,
turns.
19
bake 1 1/2 hr at 320 F.
Wire size
1/16 x 1/4 in.
Fungus
Type of wire...Double cotton-covered strip
treatment.
Spray with MIL-V-173 varnish.
copper.
g. Schematic Wiring Diagrams.
Compounds No. 7
(1) Refer to figure 1 for a schematic wiring
and No. 8:
diagram for moder SECM shop set.
Number of
(2) Refer to figure 2 for a schematic wiring
turns. 21
diagram for model CMU-5 shop set.
Series section-Continued
Compounds No. 7 and No. 8-Continued
Figure 2. Schematic wiring diagram, model CMU-5.
Wire size
1/16 x 1/4 in.
Type of wire - Double cotton-covered strip
(Located in back of Manual)
copper.
Dipping compounds Varnish, Type AN, Grade
h. Time Standards .
Table I lists the number of
CB, MIL-V -1137A.
man-hours required under normal conditions for various
Dipping and baking
operations in the maintenance and repair of the
Number of
generator set. The man-hours listed are not intended to
coils.
2 assemblies
be rigid standards.
Under adverse conditions, the
Coil
operations will take considerably longer; whereas, under
connection. Series
ideal conditions with highly skilled mechanics, most of
Insulating
the operations can be accomplished in considerably less
materials. 150A insulator (2 rqr). BW
time.
insulation (2 rqr). BW
compound insulation (2
rqr). Pole piece wrapper
(as rqr). 4 1/2 in. pole
piece toe insulation (as
tion (as rqr). Class B in-
terpole wrapper (as rqr).
Lower compound lead in-
sulation (1 rqr).
Dipping
compound. Varnish, Type AN, Grade
CB, MIL-V-1137A.
Table I. Time Standards
Hours
(1)
Lubrication and service.
03 FUEL SYSTEM
0308 Engine Speed Governor
Governor assembly
(change oil) .................................................................................................................. 0.5
17 BODY; CAB; HOOD; HULL
1712 Special Purpose Bodies
Body, assembly, spec ial purpose
(clean) .......................................................................................................................... 1.0
44 WELDING
4406 Ventilating, Cooling System
Filter, air
(clean with air) ............................................................................................................... 0.1
6