TM 5-4940-200-35
Figure 29. Receptacle boxes and cables, removal and installation.
remove
the
c. Installation.
receptacle box and cable.
b. Cleaning and Inspection.
receptacle box and cable.
(1) Clean the rec eptacle box with an
receptacle box cable leads at the control
approved cleaning solvent.
Clean the
panel.
armored cable with a stiff brush.
(3) Refer to TM 5-4940-200-12 and ins tall the
(2) Inspect the receptacle box for cracks or
receptacle and cover.
breaks. Replace a damaged receptacle
box.
(3) Inspect the armored cable for cracks or
breaks or other damage.
Replace a
damaged or defective cable.
Section X. VEHICLE FRAME EXTENSION AND SHOP SET BODY
takeoff or an outside electrical power source.
52.
General
The shop set body is mounted on a 3/4-ton 4 by 4,
53.
Frame Assembly
modified truck frame.
The body is constructed of
aluminum with riveted joints.
It has weathertight
a. General.
The frame assembly is a rear
compartments on each side for storing tools and
extension welded to the truck frame to provide support to
equipment.
The compartments are designed to
the shop set body that is longer than the standard 3/,-ton
accommodate specific items so that the load is
truck body.
balanced. A generator-welder is mounted inside the
body and can be operated by an integrated power
55