TM 55-4920-215-15
e. Lathe, 10 Inch Swing. The lathe is mounted at
plan of shop set.
the forward end of the shop interior (fig. 16). The lathe
control box is mounted underneath the lathe and the tool
c. Pothead Assembly. The pothead assembly is
chest for the lathe accessories is mounted at the right
mounted to the outside front wall of the forward storage
forward interior corner of the shop (fig. 17). The
compartment (fig. 16), with brackets and straps (figures
mounting plate, for the lathe is shown in figure 35;
mounting details for the control box are shown in figures
equipment are shown in figures 28 through 32.
are
shown
in
through
on the forward platform of the shop. Location : and
Figure 26. Details pothead assembly mounting bracket.
51
