TM 9-4933-223-13&P
13-13. SHOP SET--INSTALLED EQUIPMENT LIST--MAINTENANCE INSTRUCTIONS(cont)
REPAIR (cont)
7
FOUR STOOLS (8).
6
ALL HANDTOOLS. Refer to SC 493395-
CL-A21 for replacement if any parts are
a. Repair any broken parts cracked
damaged.
welds by rewelding.
b. Straighten bent parts.
c. If not repairable, refer to SC 4933-95-
CL-A21 for replacement.
NOTE
8
FOUR NUTS (9), FOUR FLAT
Parts (9 thru 13) are used to secure
WASHERS (10), FOUR SCREWS (11),
the machinist's vise to the right
table.
FOUR FLAT WASHERS(13). Replace if
missing, damaged, or corroded.
9
MACHNIST'S VISE (14).
a. Refer to vendor supplied information
for repair procedures.
b. Refer to SC 4933-95-CL-A21 for
replacement if not repairable.
-
3-126