TM 9-4933-223-13
5
ARBOR PRESS (3). Position on right
table (2) as follows: The front edge of
Harbor press should be extended 2.00 in.
( 5.08 cm) over front edge of table and
center line of arbor press 36.00 in.
(91.44 cm) from cargo door end of table.
6
RIGHT TABLE (2). Mark location of
mounting holes using arbor press (3) as a
template.
7
ARBOR PRESS (3). Remove.
8
RIGHT TABLE (2). Drill two 0.50in.
(1.27-cm) diameter holes through top at
marked locations.
3-131
