TM 9-4933-223-13&P
13-13. SHOP SET--INSTALLED EQUIPMENT LIST--MAINTENANCE INSTRUCTIONS (cont)
MODIFICATION OF RIGHT TABLE (cont)
9
GRINDING MACHINE (4). Position on
right table as follows: The front edge of
grinding machine base should be flush
with the front edge of table (within +0.50
in. (1.27 cm)); the outside edge of the
left grinding wheel should be flush with
the personnel door end of the table
(within +0.50 in. (1.27 cm)).
MODIFICATION OF STORAGE CABINET AND
PORTABLE DEGREASER
10
RIGHT TABLE (2). Mark location of
mounting holes using grinding machine
NOTE
(4) as a template.
Steps 1 thru 13 are used only for
11
GRINDING MACHINE (4). Remove.
initial installation or when the
storage cabinet and/or portable
12
RIGHT TABLE (2). Drill two 0.50in.
degreaser have been replaced with
(1.27-cm) diameter holes through top at
new items.
marked locations.
3-132
