TM 9-4933-223-13&P
9
PORTABLE DEGREASER (6). Position in mounting frame (10).
10
SHIM (0.250-IN. (0.635-CM) THICK) (11). Place between front of portable degreaser (6)
and front angle of mounting frame (10).
11
PORTABLE DEGREASER (6). Mark location (two in front, one on left side, and one on
right side) of mounting holes using mounting frame (10) as a template.
12
SHIM (0.250-IN. (0.635-CM) THICK) (11). Remove.
13
PORTABLE DEGREASER (6).
a. Remove from mounting frame (10).
b. Drill four 0.50-in. (1.27-cm) diameter holes (two in front, one on left side, and one on
right side) at marked locations
INSTALLATION
1
STORAGE CABINET (1). Install
in mounting frame with front facing
the left table (2).
2
FOUR
SCREWS
(3),
FOUR
(5). Install.
3
PORTABLE DEGREASER (6)
.
a.Remove four casters (7) and put in
tank.
3-135