TM 9-4933-223-13&P
Personnel Required: 2
Aircraft armament
Lift right and left ends
repairmen
when removing or install-
ing table.
NOTE
There are two tables in the shop set. They are the same except
References
that the right table is modified to mount the arbor press,
grinding machine, and machinist's vise. Maintenance
SC 4933-95-CL-A21
procedures are given for only one table and must be repeated
TM 9-237
for the second table. The tables are supplied by various
manufacturers and there may be slight variations.
INSPECTION
TABLE (1), FRAME (2), AND BRACES (3).
a. Inspect for missing, damaged, or corroded hardware.
b. Thoroughly inspect table legs, frames, and braces paying
special attention to weld points for corroded, damaged, or
missing parts.
3-159
