TM 9-4933-223-13&P
3-15. SHOP SET--DOOR MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
NOTE
Adhesive is a mixture of resin (item 3, app D),and
hardener (item 3, app D); mix according to vendor
supplied information.
2
CAULK GUN (3).
a. Fill with adhesive.
b. Insert into one 0.125-in. (0.318-cm) diameter hole (4).
c.
Release adhesive until it flows from the other 0.125-in. (0.318-
cm) diameter hole (5).
WARNING
CAUTION
Dry cleaning solvent (SD) is
After performing step 3 allow
flammable and should not be
time for adhesive to set
used near an open flame or in
before using blind inserts.
a smoking area. Use only in
3
PERSONNEL DOOR (6). Wipe off
well-ventilated areas. This
excess adhesive with a wiping rag (item
solvent evaporates quickly
15, app D) dipped in dry cleaning
and has a drying effect on
solvent (item 6, app D).
skin. When used without
gloves, it may cause cracks
in the skin and in some cases
mild irritation.
3-156
