TM 9-4933-223-13&P
INSTALLATION
WARNING
Do not connect or disconnect cable adapter assembly when
shop set is energized.
1.
PLUG CONNECTOR (1). Install on mating connector (2) of power
distribution panel.
2.
TERMINAL LUG (3).
a. Attach wire of grounding rod (4).
b. Tighten.
3.
GROUNDING ROD (4). Push into ground near plug connector (1).
CAUTION
Remove dust covers just
prior to connection to
protect connectors from
dirt, dust, etc.
4.
DUST COVER (5). Remove from
electrical plug connector (male)
(6) on 120/208V cable assembly
(7).
5.
DUST COVER (8). Remove from
female connector (9) on cable
adapter assembly (10).
3-235
