TM 9-4933-223-13&P
35.
THREE SCREWS (42). Install.
36.
SPACER (32) AND GLAND (31). Slide
into position at rear of rear
34.
CABLE ASSEMBLY (43) AND SCREW
connector housing (33).
33.
DUST COVER (41) AND SCREW (42).
(42). Assemble.
Assemble.
37.
GRIP (30). Push into position.
38.
GLAND NUT (29).
a. Slide toward rear connector
housing (33).
CAUTION
Gland nut has left-hand
threads and should be
tightened by turning in
opposite direction from
that used to tighten
standard right-hand
threaded nuts.
b. Tighten to a torque level of
39.
FEMALE CONNECTOR (44). Mark
35 to 40 lb-ft (47.25 to 54
designation "P2" on exterior
N-m).
using marking ink(item 17, app
c. Retorque to same level after using
approximately 12 hours.
3-233
