TM 9-4933-223-13&P
3-26.
CABLE ADAPTER ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
8.
TWO CABLE SEAL BUSHINGS (3).
a. Adjust one bushing until it
sits on land (15) in front of
cable clamp (16).
b. Adjust other bushing until it
sits on land (17) in back of
cable clamp (16).
9
TWO CABLE CLAMP SCREWS (18).
Loosen.
10.
UPPER HALF OF BODY (19).
Assemble over lower half of body (11).
11.
TERMINAL LUG (20). Install over
one screw hole (21) in upper half
of body (19).
12.
SIX SCREWS (22).
a. Install in upper half of body
(19).
b. Tighten.
3-228
