TM 9-4933-223-13&P
13.
CLAMPING NUT (1).
a. Rotate until notch (23) is
alined with boss (24) on
lower half of body (11).
b. Push into position by sliding
over boss (24).
14.
TWO CABLE CLAMP SCREWS (18).
Tighten evenly.
16.
PLUG CONNECTOR (26). Mark desig-
nation "P1" on exterior using
marking ink (item 17, app D).
17.
BAND (27).
a. Slip on cable (2).
b. Position at rear of plug connector
(26) and shrink in place using heat
gun.
15.
GASKET (25). Install.
3-229
