TM 9-4933-223-13&P
INSPECTION
1
TAG (1). Check to ensure it is not missing and is readable.
2
STRAP (2). Check to see if missing or damaged.
NOTE
The cable assembly is used to mechanically
3
TWO TERMINALS (3). Check for missing or broken parts.
attach the cable adapter assembly to the
120/208V cable assembly. The purpose of
4
WIRE ROPE (4). Check for broken or worn parts.
the cable assembly is to discourage the
electrical disconnection of the cable adapter
5
BAND (5). Check to ensure it is not missing and is readable.
assembly from the 120/208V cable assembly.
REMOVAL
1 SCREW (1). Remove from female connector (2) on cable
adapter assembly (3).
2
CABLE ASSEMBLY (4). Remove one end from screw (1).
3
SCREW (1). Reinstall in female connector (2).
4 SCREW (5). Remove from electrical plug connector (male)
(6) on 120/208V cable assembly (7).
5
CABLE ASSEMBLY (4). Remove one end from screw (5).
6
SCREW (5). Reinstall in electrical plug connector (male) (6).
3-241
