TM 9-4933-223-13&P
3-30. WIRE ASSEMBLY (SWITCHBOX)--MAINTENANCE INSTRUCTIONS
This task covers:
a. Removal
d.
Repair
b. Inspection
e.
Reassembly
c. Disassembly
f.
Installation
INITIAL SETUP:
Special Tools
General Safety Instructions
Armament repair shop set (SC 4933-95-CL-A21)
Basic aircraft armament repair tool set
WARNING
(SC 5180-95-CL-B09)
The shop set contains voltages which are
Supplemental aircraft armament repair tool set
dangerous if contacted. Before perform-
(SC 5180-95-CL-B10)
ing any maintenance on the wire assembly,
Materials/Parts
ensure the circuit breaker on power
Abrasive cloth (item 4, app D)
distribution panel connected to the power
Lug terminal (MS25036-111)
source is in the OFF position and the
Wire (12011690-4)
120/208V cable assembly is disconnected
from the shelter.
References
NOTE
There are two wire assemblies tagged no.
4B and no. 8 used in the S7/S8 switchbox
Wire table.
assembly as interconnections between the
Disassembly and reassembly procedures for
S7 microswitch and S8 toggle switch.
shop set--electrical installation.
Each assembly consists of one 4.00-in.
(10.16-cm) stranded black wire with a lug
terminal at each end. Refer to wire
written for a quantity of one wire assem-
bly and must be repeated for the second
wire assembly.
Change 1 3-245
