TM 9-4933-223-13&P
3-32. WIRING HARNESS ASSEMBLY (SWITCHBOX TO DISTRIBUTION PANEL)--MAINTENANCE INSTRUCTIONS (cont)
REMOVAL
INSPECTION
NOTE
The harness assembly is comprised of six wire
SIX WIRE ASSEMBLIES.
assemblies which are tagged no. 1, no. 2, no. 3,
a. Inspect for breaks, corrosion, and worn or deteriorated
no. 4A, no. 6A, and no. 7. Refer to wire table 3-
parts.
b. Check continuity with an ohmmeter.
For removal procedures for the wiring harness assembly, refer
REPAIR
DISASSEMBLY
For repair, refer to paragraph 3-33,
HARNESS ASSEMBLY (1). Separate six
wire assemblies (2).
3-252
